GIGABYTE Gen3 NVMe 2500E 1TB M.2 G325E1TB Internal SSD
- Form Factor: M.2 2280
- Interface: PCI-Express 3.0 x4, NVMe 1.3
- Total Capacity: 1000GB*
- Sequential Read Speed : up to 2400 MB/s**
- Sequential Write speed : up to 1800 MB/s**
- HMB (Host Memory Buffer) supported
- TRIM & S.M.A.R.T support
- Energy-Efficient
₹6,349.00 ₹11,500.00
GIGABYTE Gen3 2500E SSD 1TB M.2 2280, PCI-Express 3.0 x4, NVMe 1.3, & it’s comes with Phison’s controller and high-quality 3D NAND, delivers up to 2400 MB/s sequential read and 1800 MB/s sequential write performance. By utilizing Host Memory Buffer technology, the SSD controller can access the host DRAM without performance loss. Furthermore, GIGABYTE Gen3 2500E SSD features TRIM, SMART, and Over-Provision support to secure your data and perform stably. The Host Memory Buffer (HMB) feature utilizes the DMA (Direct Memory Access) of PCI Express to allow SSDs to use some of the DRAM on PC system, instead of requiring the SSD to bring its own DRAM. Comparing with regular PCIe 3.0 x4 SSD, GIGABYTE Gen3 2500E SSD reduces about 30% power while operating. Power consumption of the GIGABYTE Gen3 2500E SSD is notably improved.
| Interface | PCIe 3.0×4, NVMe1.3 interface |
|---|---|
| Form Factor | M.2 2280 |
| Total Capacity | 1000GB |
| External DDR Cache | N/A |
| Sequential Read speed | Up to 2400 MB/s |
| Sequential Write speed | Up to 1800 MB/s |
| Random Read IOPS | Up to 130K |
| Random Write IOPS | Up to 350K |
| Dimension | 22 x 2.3 x 80 mm |
| Mean time between failure (MTBF) | 1.5 million hours |
| Max. Operating Power |
Read: 2670mW Write: 3200mW |
| Power Consumption (Idle, PS3) | 30mW |
| Power Consumption(PS4, L1.2) | 5mW |
| Temperature (Operating) | 0°C to 70°C |
| Temperature (Storage) | -40°C to 85°C |
| Warranty |
1. Limited 3 years or 240TBW. 2. Limited warranty based on 3 years or 240TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. ) *TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail. 3. When the usage of an NVME SSD as indicated by the “Percentage Used” (SMART ID: 05) in SMART page of “GIGABYTE SSD toolbox” reaches 100 means out of warranty. (A new unused product will show the number of 0) |
| Note |
• Test system configuration: configuration may vary by models, we will choose the latest platform for verification. • Performance may vary based on SSD’s firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0. • Speeds based on internal testing. Actual performance may vary. • 1GB = 1 billion bytes. Actual useable capacity may vary. |
Based on 0 reviews
Be the first to review “GIGABYTE Gen3 NVMe 2500E 1TB M.2 G325E1TB Internal SSD”
You must be logged in to post a review.
There are no reviews yet.